WYWIRES PLATINUM SERIES
DIN (Straight or Right Angle) to RCA w Ground - 5' (1.5M) Standard
1877 DIN and Furutech RCA
Extra Length - $150 per Foot
Platinum is a recently-developed series that takes most of the elements of the Silver and adds additional conductor material of varying gauges of Litz wire to accomplish the goals of higher bandwidth and greater frequency extension especially at the low end of the spectrum with increased dynamic range and “slam”. In addition, the Platinum adds greater dimensional information along with more separation of instruments and performers within the soundstage. Identified by brilliant white outer sheathing/thin gray banding.
Phono cables are available in virtually any configuration to fit any tonearm where the output cable can be detached.
A typical moving coil phono cartridge is able to generate a signal that is as low as 0.2 millivolts or as high as 3.0 millivolts. The highest output of any phono catridge we are aware of is 5 millivolts. Although the range of output in phono cartidges is broad, this output is minuscule compared to the output of a DAC, CD player or preamplifier. Our phono cables are engineered with this output disparity in mind and not simply a reconfigured analog interconnect. WyWires phono cables are unshielded as standard but can be ordered shielded at no additional cost.
4 ft standard length (1.23 meters)
Capacitance: 7.9 pF (per foot at a frequency of 10kHz)
To integrate a phono cartridge to a preamplifier or phono stage
For more information, please visit this product's webpage.