Kirmuss Audio KA-RC-1 Record Restorer
Kirmuss Audio KA-RC-1 Record Restorer
$970.00
The Kirmuss Audio Patented and Patents Pending record
suspension system assures that records of any speed and size see their
grooves cleaned SAFELY. No damage to the record by mechanical intrusion
of skewers and the like. FOUR RECORDS AT A TIME MAY BE PROCESSED.
Only distilled water with a maximum of 40 mL (1.4 oz) of
ISA (Isopropyl) 70% solution constitutes the initial de-grease bath. Only in the first 2 or 5 minute initial
cycle does this remove surface dust, fingerprint oils, sand. Subsequent restoration cycles apply a PVC friendly water soluble, anti-bacterial, anti-fungal and anti-static ionizing surfactant spray onto the record. When brushed in using the supplied
goat hair brush, the application now changes the charge of the record
with relation to the water in the ultrasonic’s tank. Then starts the
groove cleaning and groove restoration process. The 500 MPH (805 KPH)
plasma wave created by cavitation is now attracted to the both the
record and the record’s groove. (Patents Pending). With the plasma wave
now brushing against the applied surfactant, this now first removes
accumulated surface contaminants present from other cleaning systems and
processes. Then as we process the records in multiple cycles, ( of 2
or 5 minutes), we then finally remove the release agent found below and
the contaminants that were microwelded into the grooves by the heat of
the needle that were causing those unwanted pops and crackles.
Using this process will assure that your record is truly clean. Experience the dramatic difference with a Kirmuss.
1 in stock
Description
The Kirmuss Audio Patented and Patents Pending record
suspension system assures that records of any speed and size see their
grooves cleaned SAFELY. No damage to the record by mechanical intrusion
of skewers and the like. FOUR RECORDS AT A TIME MAY BE PROCESSED.
Only distilled water with a maximum of 40 mL (1.4 oz) of
ISA (Isopropyl) 70% solution constitutes the initial de-grease bath. Only in the first 2 or 5 minute initial
cycle does this remove surface dust, fingerprint oils, sand. Subsequent restoration cycles apply a PVC friendly water soluble, anti-bacterial, anti-fungal and anti-static ionizing surfactant spray onto the record. When brushed in using the supplied
goat hair brush, the application now changes the charge of the record
with relation to the water in the ultrasonic’s tank. Then starts the
groove cleaning and groove restoration process. The 500 MPH (805 KPH)
plasma wave created by cavitation is now attracted to the both the
record and the record’s groove. (Patents Pending). With the plasma wave
now brushing against the applied surfactant, this now first removes
accumulated surface contaminants present from other cleaning systems and
processes. Then as we process the records in multiple cycles, ( of 2
or 5 minutes), we then finally remove the release agent found below and
the contaminants that were microwelded into the grooves by the heat of
the needle that were causing those unwanted pops and crackles.
Using this process will assure that your record is truly clean. Experience the dramatic difference with a Kirmuss.
Reviews
There are no reviews yet.