WyWires - JUICE II Power Cord - 4 feet (1.2M) Standard Length

  

WYWIRES SILVER SERIES

WyWires Silver series is the classic line that started our revolution in air dielectric, Litz wire design. The Silver line embodies our design philosophy of ”less is more,” yielding unprecedented electrical and sonic performance.  Identified by gray/silver outer sheathing.

The power supplies present in modern audio equipment assume that incoming power from the grid is fairly good in terms of phase, voltage and amperage. While a power cord will not add or subtract volts or amps (unless it’s undersized) we are able to partially correct phase anomalies present in the power grid. Our Litz wire power cord with its asymmetrical Litz bundles actually improves image focus, soundstage size and “openness” and helps to preserve the presence and scale of the original performance. The Juice II power cord is sized adequately for any known amplifier regardless of its current draw. Available in any length up to 20 feet and can be fitted with 15 or 20 amp IEC plugs along with NEMA (North America), Schuko (Europe) UK and Australia input plugs.

SPECIFICATIONS

Juice II Power Cords:

Capacitance: 8.1 pF (per foot at a frequency of 60Hz)
9 AWG (American Wire Guage) Asymmetrical Litz wire with 14 AWG ground
For any component with a replaceable (IEC) power cord. Standard for North America (Edison) receptacles. Special order for Asian, Australian, European and UK versions.

Juice II HC High Current Power Cords:  available separately or integrated into Power Broker AC Distributor

Capacitance: 8.9 pF (per foot at a frequency of 60Hz)
7 AWG (American Wire Gauge) Double cotton wrapped Asymmetrical Litz wire with 12 AWG ground
For devices such as large power amplifiers or power distribution devices that require a larger than normal power delivery capability. Standard for North America (Edison) receptacles. Special order for Asian, Australian, European and UK versions.

For more information, please visit this product's webpage.