Kirmuss Audio KA-RC-1 Record Restorer

  • Model: KA-RC-1
  • Shipping Weight: 30lbs
  • 1 Units in Stock
  • Manufactured by: Kirmuss Audio
$970.00
Qty :
+
-

The Kirmuss Audio Patented and Patents Pending record suspension system assures that records of any speed and size see their grooves cleaned SAFELY. No damage to the record by mechanical intrusion of skewers and the like. FOUR RECORDS AT A TIME MAY BE PROCESSED.

a7f54e6213ed205af224e020af107d76
28cb2866bd4e893a1d031c36da226997

Only distilled water with a maximum of 40 mL (1.4 oz) of ISA (Isopropyl) 70% solution constitutes the initial de-grease bath.  Only in the first 2 or 5 minute  initial cycle does this remove surface dust, fingerprint oils, sand. Subsequent restoration cycles apply a PVC friendly water soluble, anti-bacterial, anti-fungal and anti-static  ionizing surfactant spray onto the record. When brushed in using the supplied goat hair brush, the application now changes the charge of the record with relation to the water in the ultrasonic's tank. Then starts the groove cleaning and groove restoration process.  The 500 MPH (805 KPH) plasma wave created by cavitation is now attracted to the both the record and the record's groove. (Patents Pending).  With the plasma wave now brushing against the applied surfactant, this now first  removes accumulated surface contaminants present from other cleaning systems and processes.  Then as we process the records in multiple cycles, ( of 2 or 5 minutes),  we then finally remove the release agent found below and the contaminants that were microwelded into the grooves by the heat of the needle that were causing those unwanted pops and crackles.

Using this process will assure that your record is truly clean. Experience the dramatic difference with a Kirmuss.